The FLUO™ DM125 is a dual mono power amplifier housed in a single chassis. The two separate dedicated amplifier circuits, one for the left channel and one for the right channel, drive each of your two loudspeakers using power from their individual and separate capacitors, rectifiers and mains transformer windings combined with a unique Single Die metal-oxide-semiconductor field-effect transistor to deliver musical accuracy across the entire music frequency range. When a big power demand from the right channel reduces the voltage of the right channel capacitors, this does not reduce the voltage of the left channel capacitors. Because they are independent. This architecture offers consistent and ultimate sound delivery. The FLUO™ design offers better performance than a traditional stereo amplifier limited because both the left and right channels share the same capacitors, and therefore share the drop in voltage reducing dynamic performance.

DM125 will deliver 125 W into an 8 Ohm loudspeaker load, 250 W into a 4 Ohm loudspeaker load and 500 W into a 2 Ohm loudspeaker load. This design works ideally doubling the power when the impedance is halved. The result is control and leading-edge musical dynamics which remain accurate and truthful to the recording irrespective of a low impedance load, for example a 2 Ohm loudspeaker.

Therefore, you will hear pure, non-distorted audio, allowing music to flow without compromise, so that your musical enjoyment spans full frequency range with minimum distortion and maximum dynamics.

The brand styling and industrial design of the FLUO™ chassis also reduces resonance frequencies. The chassis design, heat sink fins and top of the product diffuse sound waves, even beyond 20 kHz. The carefully considered dimensions act as sound diffusers, and the front panel also acts to diffuse any transmitted sound waves. Generally, products with large flat surfaces reflect high-frequency sound, similar to the way a mirror reflects light. Possibly for the first time, FLUO™ reduces these problems, enabling the products function at their best without external compromise.

FLUO’s advanced protection system offers a well-proven system, which detects any signal outside the limits and automatically mutes the input for 1 second to make sure, that you notice the problem. Then the system tests for 1 ms to test if the problem still exists. If you have removed the problem, i.e., a frayed loudspeaker wire making a short circuit, the amplifier will automatically play music again.

This innovative circuit checks abnormal high frequencies, voltage, current, phase angle and load.